Previous
Next

AC Installation in Coimbatore

MVP Air conditioner is the best AC installation in Coimbatore Approximate time 4 Hour(s) Assembly of all parts supplied by the manufacturer (new unit) or the customer (old unit) Installation at a feasible and appropriate location Checking of all settings post installation.

Warranty on consumables and parts will be as per manufacturer only If any repair work is required, a quote will be given before proceeding Warranty on consumables and parts will be as per manufacturer only If any repair work is required, a quote will be given before additional charges will be applied if core-cutting is required.

AC Installation in Coimbatore

Why MVP is Best AC Installation in Coimbatore

Best AC installation in Coimbatore

We are the best AC installation in Coimbatore 24/7 emergency service available. We are Installing all brand AC with efficient manner based on customer request with quickly.

AC stand and any additional wiring costs shall not be included in this service. Service center will not be liable for any pre-existing issues/potential risks reported by the technician but not handled due to the refusal of the customer to repair the same.

Our technicians do not carry ladders. If necessary, the customer must provide the ladder. Procedure We provide Assembling all parts supplied by the manufacturer (new unit) or the customer (old unit) AC Installation in a feasible and appropriate location of all settings post Installation of output of the AC unit after installation correct Gas pressure check-up after installation.

Split AC Covered under standard installation in Coimbatore

Drilling on the wall to create a cavity/hole to allow the routing of the pipe/tube from the indoor unit (IDU) to the outdoor unit (ODU)

  • Installation of the copper and drain line, connecting the indoor unit (IDU) to the outside unit (ODU) using standard wire/thread length supplied by the manufacturer;
  • Attachment of separately purchased stabilizer and electrical connections to the AC unit;
  • Regulation of cooling efficiency and product demonstration
  • Installation costs to be charged directly to the engineer at the time of installation.
  • MVP is the best Split AC Installation in Coimbatore. They are in the field of 10+ years.
Split AC installation in Coimbatore

Pre AC Installation Site Readiness

Pre AC Site Readiness

Plug/Plug Point or MCB with sufficient wiring within 1 meter of the IDU unit

  • Any scaffolding or other ODU installation specifications.
  • Device would not be installed if there is no ODU Provision (Accessibility/Safety/Future Service)
  • Meter Capacity of at least 15 A for single step.
  • Separate MCB with at least 25 A MCB and 15 A Plug Stage.
  • 2.5 Sq MM. Independent wiring from the mains to the AC plug stage.
  • Proper landing.
  • In the case of Power Spikes High Voltage/Low Voltage Stabilizer Cut off to be used.
  • Proposed 2 ton for 3 phase meter with AC attached to 1 phase.
  • Above 2 ton of Voltas Touch for proper guidance.
  • Installation cannot be achieved on a load bearing beam.
  • Pre-cut space on the grill/wall to the appropriate size of AC.

Window Air-Conditioners: Covered Under Standard Installation Coimbatore

  • Place the AC in the pre-cut grill room
  • Closing of boundary holes with heat insulating material
  • Attachment of separately purchased stabilizer and electrical connections to the AC unit;
  • Regulation of cooling efficiency and product demonstration.
  • Maintenance Costs to be charged directly to the engineer at the time of installation.
  • MVP is the best Window AC Installation in Coimbatore.
  • They are expert in this AC Installation field 10+ years.
  • Before they are going to install window air conditioner they may be check the precaution steps by our AC installation expert technicians.
Window AC installation in Coimbatore

Not Covered Under Standard AC Installation:

Where there are voltage spikes in the field, additional voltage stabilizer is suggested.

  • Extension of wiring from electrical meter to installation site, power point/MCB fitting and all other electrical job
  • Any more lengths of copper wire needed for grill/glass cutting and soldering operations;”
  • Dismantling/Shifting of old AC-Applied Charges.
  • Useful detail on AC capacity and space size: Please refer to the tonnage calculator or call the customer service brand to settle on the AC capacity (tonnage) for the size of the room.
  • Please notice that brand technicians can refuse installation if the AC capability is below the threshold for a given room size, as it affects the cooling and compressor output that invalidates the warranty.
  • Below is the recommended AC capacity for different room sizes-room sizes smaller than or equal to 120 square meters.
  • Ft.-> Less than or equivalent to 1.2 tons, Room scale from 121 to 179 sq.
  • Ft.-> 1.4 to 1.5 Ton, Space sizes larger than or equal to 180 sq.
  • Ft.-> 2 tons or more, space size larger than 180 sq.

Leave a Reply